This program will allow you to configure the connection between the POSTEC Communications Controller and the PC that will have Idealpos installed.
You will be required to enter a Username and Password to enter this function.
Click ‘Next’ to use the PCC Connection Wizard.
Select the option that you are using to connect to the PCC.
Depending on your selection, you will need to select which PC the PCC is connected to, or the IP address of the PCC.
You will need to navigate through some of the screens displayed below for the correct setting.
You will need to confirm the following settings with the POSTEC consultant.
The settings will be displayed in a window for you to confirm. If they are correct, press ‘Finish’.
